Age-Related Dysfunction in Balance: A Comprehensive Review of Causes, Consequences, and Interventions.

This review delves into the multifaceted aspects of age-related balance changes, highlighting their prevalence, underlying causes, and the impact they have on the elderly population. Central to this discussion is the exploration of various physiological changes that occur with aging, such as alterations in the vestibular, visual, proprioceptive systems, and musculoskeletal degeneration. We examine the role of neurological disorders, cognitive decline, and medication side effects in exacerbating balance issues. The review underscores the significance of early detection and effective intervention strategies in mitigating the risks associated with balance problems, such as falls and reduced mobility. It discusses the effectiveness of diverse intervention strategies, including exercise programs, rehabilitation techniques, and technological advancements like virtual reality, wearable devices, and telemedicine. Additionally, the review stresses the importance of a holistic approach in managing balance disorders, encompassing medication review, addressing comorbidities, and environmental modifications. The paper also presents future research directions, emphasizing the need for a deeper understanding of the complex mechanisms underlying balance changes with aging and the potential of emerging technologies and interdisciplinary approaches in enhancing assessment and intervention methods. This comprehensive review aims to provide valuable insights for healthcare providers, researchers, and policymakers in developing targeted strategies to improve the quality of life and ensure the well-being of the aging population.

Understanding the Fast-Triggering Unfolding Dynamics of FK-11 upon Photoexcitation of Azobenzene.

Photoswitchable molecules can control the activity and functions of biomolecules by triggering conformational changes. However, it is still challenging to fully understand such fast-triggering conformational evolution from nonequilibrium to equilibrium distribution at the molecular level. Herein, we successfully simulated the unfolding of the FK-11 peptide upon the photoinduced trans-to-cis isomerization of azobenzene based on the Markov state model. We found that the ensemble of FK-11 contains five conformational states, constituting two unfolding pathways. More intriguingly, we observed the microsecond-scale conformational propagation of the FK-11 peptide from the fully folded state to the equilibrium populations of the five states. The computed CD spectra match well with the experimental data, validating our simulation method. Overall, our study not only offers a protocol to study the photoisomerization-induced conformational changes of enzymes but also could orientate the rational design of a photoswitchable molecule to manipulate biological functions.

Heterogeneous Nucleating Agent for High-Boiling-Point Nonhalogenated Solvent-Processed Organic Solar Cells and Modules.

High-boiling-point nonhalogenated solvents are superior solvents to produce large-area organic solar cells (OSCs) in industry because of their wide processing window and low toxicity; while, these solvents with slow evaporation kinetics will lead excessive aggregation of state-of-the-art small molecule acceptors (e.g. L8-BO), delivering serious efficiency losses. Here, a heterogeneous nucleating agent strategy is developed by grafting oligo (ethylene glycol) side-chains on L8-BO (BTO-BO). The formation energy of the obtained BTO-BO; while, changing from liquid in a solvent to a crystalline phase, is lower than that of L8-BO irrespective of the solvent type. When BTO-BO is added as the third component into the active layer (e.g. PM6:L8-BO), it easily assembles to form numerous seed crystals, which serve as nucleation sites to trigger heterogeneous nucleation and increase nucleation density of L8-BO through strong hydrogen bonding interactions even in high-boiling-point nonhalogenated solvents. Therefore, it can effectively suppress excessive aggregation during growth, achieving ideal phase-separation active layer with small domain sizes and high crystallinity. The resultant toluene-processed OSCs exhibit a record power conversion efficiency (PCE) of 19.42% (certificated 19.12%) with excellent operational stability. The strategy also has superior advantages in large-scale devices, showing a 15.03-cm2 module with a record PCE of 16.35% (certificated 15.97%).

Elevated aerobic glycolysis driven by p62-mTOR axis promotes arsenic-induced oncogenic phenotypes in human mammary epithelial cells.

Chronic arsenic exposure is considered to increase the risk of breast cancer. p62 is a multifunctional adaptor protein that controls myriad cellular processes and is overexpressed in breast cancer tissues. Although previous studies have indicated the involvement of p62 accumulation in arsenic tumorigenesis, the underlying mechanism remains obscure. Here, we found that 0.1 µM or 0.5 µM arsenite exposure for 24 weeks induced oncogenic phenotypes in human mammary epithelial cells. Elevated aerobic glycolysis, cell proliferation capacity, and activation of p62-mTOR pathway, as indicated by increased protein levels of p62, phosphorylated-mTOR (p-mTOR) and hypoxia-inducible factor 1α (HIF1α), were observed in chronically arsenite-exposed cells, and of note in advance of the onset of oncogenic phenotypes. Moreover, p62 silencing inhibited acquisition of oncogenic phenotypes in arsenite-exposed cells. The protein levels of p-mTOR and HIF1α, as well as aerobic glycolysis and cell proliferation, were suppressed by p62 knockdown. In addition, re-activation of p­mTOR reversed the inhibitory effects of p62 knockdown. Collectively, our data suggest that p62 exerts an oncogenic role via mTORC1 activation and acts as a key player in glucose metabolism during arsenite-induced malignant transformation, which provides a new mechanistic clue for the arsenite carcinogenesis.

Study on Fatigue Life of Aluminum Alloy 6061-T6 Based on Random Defect Characteristics.

A certain number of hole-like defects will occur in aluminum alloys under cyclic loading. The internal holes will reduce the strength of the material and cause stress concentration, which will aggravate the development of fatigue damage. A classification method of defect features based on X-ray CT damage data is proposed. The random hole distribution model is established through the linear congruence method and the region division method. The hole parameter is introduced as the intermediate variable of the 3D reconstruction model of internal defects. In the mesoscopic stage, the function relationship between the distribution of random holes and the fatigue life is established based on the coupling relationship between the number and proportion of pores and the fatigue life. In the macroscopic stage, the relationship between the random holes and the macroscopic crack growth life is established by taking the crack length as the damage variable. The crack propagation rate decreased with the increase in the number of holes. The prediction model of the whole life stage is established using the life function from microcrack initiation to macroscopic crack propagation. Finally, the validity of the whole stage fatigue life prediction model is demonstrated through the comparison and verification of experiments, which provides a certain engineering value for the life estimation of 6061-T6 aluminum alloy materials.

Macromers for Encapsulating Perovskite Photovoltaics and Achieving High Stability.

Perovskite solar cells (pero-SCs) are highly unstable even under trace water. Although the blanket encapsulation (BE) strategy applied in the industry can effectively block moisture invasion, the commercial UV-curable adhesives (UVCAs) for BE still trigger power conversion efficiency deterioration, and the degradation mechanism remains unknown. For the first time, the functions of commercial UVCAs are revealed in BE-processed pero-SCs, where the small-sized monomer easily permeates to the perovskite surface, forming an insulating barrier to block charge extraction, while the high-polarity moiety can destroy perovskite lattice. To solve these problems, a macromer, named PIBA is carefully designed, by grafting two acrylate terminal groups on the highly gastight polyisobutylene and realizes an increased molecular diameter as well as avoided high-polarity groups. The PIBA macromer can stabilize on pero-SCs and then sufficiently crosslink, forming a compact and stable network under UV light without sacrificing device performance during the BE process. The resultant BE devices show negligible efficiency loss after storage at 85% relative humidity for 2000 h. More importantly, these devices can even reach ISO 20653:2013 Degrees of protection IPX7 standard when immersed in one-meter-deep water. This BE strategy shows good universality in enhancing the moisture stability of pero-SCs, irrespective of the perovskite composition or device structure.

RNA N6-Methyladenosine Affects Copper-Induced Oxidative Stress Response in Arabidopsis thaliana.

Recently, post-transcriptional regulation of mRNA mediated by N6-methyladenosine (m6A) has been found to have profound effects on transcriptome regulation during plant responses to various abiotic stresses. However, whether this RNA modification can affect an oxidative stress response in plants has not been studied. To assess the role of m6A modifications during copper-induced oxidative stress responses, m6A-IP-seq was performed in Arabidopsis seedlings exposed to high levels of copper sulfate. This analysis revealed large-scale shifts in this modification on the transcripts most relevant for oxidative stress. This altered epitranscriptomic mark is known to influence transcript abundance and translation; therefore we scrutinized these possibilities. We found an increased abundance of copper-enriched m6A-containing transcripts. Similarly, we also found increased ribosome occupancy of copper-enriched m6A-containing transcripts, specifically those encoding proteins involved with stress responses relevant to oxidative stressors. Furthermore, the significance of the m6A epitranscriptome on plant oxidative stress tolerance was uncovered by assessing germination and seedling development of the mta (N6-methyladenosine RNA methyltransferase A mutant complemented with ABI3:MTA) mutant exposed to high copper treatment. These analyses suggested hypersensitivity of the mta mutant compared to the wild-type plants in response to copper-induced oxidative stress. Overall, our findings suggest an important role for m6A in the oxidative stress response of Arabidopsis.

Recent Progress in Dopant-Free and Green Solvent-Processable Organic Hole Transport Materials for Efficient and Stable Perovskite Solar Cells.

Dopant-free hole transport layers (HTLs) are crucial in enhancing perovskite solar cells (pero-SCs). Nevertheless, conventional processing of these HTL materials involves using toxic solvents, which gives rise to substantial environmental concerns and renders them unsuitable for large-scale industrial production. Consequently, there is a pressing need to develop dopant-free HTL materials processed using green solvents to facilitate the production of high-performance pero-SCs. Recently, several strategies have been developed to simultaneously improve the solubility of these materials and regulate molecular stacking for high hole mobility. In this review, a comprehensive overview of the methodologies utilized in developing dopant-free HTL materials processed from green solvents is provided. First, the study provides a brief overview of fundamental information about green solvents and Hansen solubility parameters, which can serve as a guideline for the molecular design of optimal HTL materials. Second, the intrinsic relationships between molecular structure, solubility in green solvents, molecular stacking, and device performance are discussed. Finally, conclusions and perspectives are presented along with the rational design of highly efficient, stable, and green solvent-processable dopant-free HTL materials.

High-Performance All-Small-Molecule Organic Solar Cells Fabricated via Halogen-Free Preparation Process.

Small-molecule organic photovoltaic materials attract more attention attributing to their precisely defined structure, ease of synthesis, and reduced batch-to-batch variations. The majority of all-small-molecule organic solar cells (ASM-OSCs) have traditionally relied on halogenated solvents for dissolving photovoltaic materials as well as used for the additives or solvent vapor annealing. However, these halogen-based processes pose risks to the environment and human health, potentially impeding future commercial production. Herein, we conducted an investigation into the impact of various nonhalogen solvents on the performance of the devices. By selecting the high boiling point solvent toluene, we achieved a desirable phase separation and stable morphology characterized by fibrous crystals within the blend film. Consequently, the power conversion efficiencies of 14.4 and 11.7% were obtained from H31:Y6-based small-area (0.04 cm2) and large-area (1 cm2) devices with steady performance, respectively. This study successfully demonstrated the fabrication of ASM-OSCs without employing halogenated solvent processes, thus offering promising prospects for the commercial production of ASM-OSCs.

Tailoring the Position of Ester Group on N-Alkyl Chains of Benzotriazole-based Small Molecule Acceptors for High-Performance Organic Solar Cells.

Side chain engineering plays a vital role in exploring high-performance small molecule acceptors (SMAs) for organic solar cells (OSCs). In this work, we designed and synthesized a series of A-DA'D-A type SMAs by introducing different N-substituted alkyl and ester alkyl side chains on benzotriazole (BZ) central unit and aimed to investigate the effect of different ester substitution positions on photovoltaic performances. All the new SMAs with ester groups exhibit lower the lowest unoccupied molecular orbital (LUMO) energy levels and more blue-shifted absorption, but relatively higher absorption coefficients than alkyl chain counterpart. After blending with the donor PM6, the ester side chain-based devices demonstrate enhanced charge mobility, reduced amorphous intermixing domain size and long-lived charge transfer state compared to the alkyl chain counterpart, which are beneficial to achieve higher short-circuit current density (Jsc ) and fill factor (FF), simultaneously. Thereinto, the PM6 : BZ-E31 based device achieves a higher power conversion efficiency (PCE) of 18.33 %, which is the highest PCE among the OSCs based on the SMAs with BZ-core. Our work demonstrated the strategy of ester substituted side chain is a feasible and effective approach to develop more efficient SMAs for OSCs.

Localized Oxidation Embellishing Strategy Enables High-Performance Perovskite Solar Cells.

Perovskite solar cell (pero-SC) has attracted extensive studies as a promising photovoltaic technology, wherein the electron extraction and transfer exhibit pivotal effect to the device performance. The planar SnO2 electron transport layer (ETL) has contributed the recent record power conversion efficiency (PCE) of the pero-SCs, yet still suffers from surface defects of SnO2 nanoparticles which brings energy loss and phase instability. Herein, we report a localized oxidation embellishing (LOE) strategy by applying (NH4 )2 CrO4 on the SnO2 ETL. The LOE strategy builds up plentiful nano-heterojunctions of p-Cr2 O3 /n-SnO2 and the nano-heterojunctions compensate the surface defects and realize benign energy alignment, which reduces surface non-radiative recombination and voltage loss of the pero-SCs. Meanwhile, the decrease of lattice mismatch released the lattice distortion and eliminated tensile stress, contributing to better stability of the devices. The pero-SCs based on α-FAPbI3 with the SnO2 ETL treated by the LOE strategy realized a PCE of 25.72 % (certified as 25.41 %), along with eminent stability performance of T90 >700 h. This work provides a brand-new view for defect modification of SnO2 electron transport layer.

Iodonium Initiators: Paving the Air-free Oxidation of Spiro-OMeTAD for Efficient and Stable Perovskite Solar Cells.

To date, perovskite solar cells (pero-SCs) with doped 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (Spiro-OMeTAD) hole transporting layers (HTLs) have shown the highest recorded power conversion efficiencies (PCEs). However, their commercialization is still impeded by poor device stability owing to the hygroscopic lithium bis(trifluoromethanesulfonyl)imide and volatile 4-tert-butylpyridine dopants as well as time-consuming oxidation in air. In this study, we explored a series of single-component iodonium initiators with strong oxidability and different electron delocalization properties to precisely manipulate the oxidation states of Spiro-OMeTAD without air assistance, and the oxidation mechanism was clearly understood. Iodine (III) in the diphenyliodonium cation (IP+ ) can accept a single electron from Spiro-OMeTAD and forms Spiro-OMeTAD⋅+ owing to its strong oxidability. Moreover, because of the coordination of the strongly delocalized TFSI- with Spiro-OMeTAD⋅+ in a stable radical complex, the resulting hole mobility was 30 times higher than that of pristine Spiro-OMeTAD. In addition, the IP-TFSI initiator facilitated the growth of a homogeneous and pinhole-free Spiro-OMeTAD film. The pero-SCs based on this oxidizing HTL showed excellent efficiencies of 25.16 % (certified: 24.85 % for 0.062-cm2 ) and 20.71 % for a 15.03-cm2 module as well as remarkable overall stability.

The urinary level of 2,4,5-trichlorophenol was positively associated with both all-cause and cause-specific mortalities in general adult residents of United States.

Chlorophenols are widespread environmental organic pollutants with harmful effects on human beings. Although relationships between chlorophenols and various dysfunctions/diseases have been reported, the contribution of chlorophenols exposure to mortalities is underdetermined. In this cohort study, we included 4 types of urinary chlorophenols, aiming to estimate associations of chlorophenols exposure with all-cause and cause-specific mortalities. Urinary chlorophenols were examined at baseline of National Health and Nutrition Examination Survey (NHANES) 2003-2010, and adjusted for the urinary creatinine level. Associations between chlorophenols and mortalities were estimated using COX regression analyses, results were shown as hazard ratio (HR) and 95% confidence interval (95% CI). By dividing participants into four subgroups based on quartiles of urinary levels of chlorophenols, associations between mortalities and categorical variables of chlorophenols were estimated. Furthermore, the quantile g-computation analysis was used to estimate the joint effects of 4 chlorophenols on mortalities. Among 5817 adults (2863 men), 1034 were deceased during the follow-up. After adjusted for confounders, 2,4,5-trichlorophenol (2,4,5-TCP) was found to be positively associated with both all-cause (HR = 1.46; 95% CI: 1.16, 1.84) and cardiovascular disease (CVD) mortalities (HR = 1.60; 95% CI: 1.00, 2.55). Compared to the subgroup of the lowest level of chlorophenols, participants in subgroups of higher 2,4,5-TCP levels showed higher risk of all-cause mortality (P-value for trend = 0.003). For CVD mortality, HRs in subgroups of higher levels of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) were statistically significant (P-values for trend were 0.017 for 2,4-DCP and 0.049 for 2,4,6-TCP). The HRs (95% CI) of joint effects of 4 chlorophenols were 1.11 (1.01, 1.21) and 1.32 (1.10, 1.57) for all-cause and CVD-specific mortalities, and 2,4,5-TCP showed the highest weight in joint effects. All of these findings implied that among 4 urinary chlorophenols we included, 2,4,5-TCP might be a sensitive one in associations with mortalities among general populations.

Volatile Perovskite Precursor Ink Enables Window Printing of Phase-Pure FAPbI3 Perovskite Solar Cells and Modules in Ambient Atmosphere.

Despite the great success of perovskite photovoltaics in terms of device efficiency and stability using laboratory-scale spin-coating methods, the demand for high-throughput and cost-effective solutions remains unresolved and rarely reported because of the complicated nature of perovskite crystallization. In this work, we propose a stable precursor ink design strategy to control the solvent volatilization and perovskite crystallization to enable the wide speed window printing (0.3 to 18.0 m/min) of phase-pure FAPbI3 perovskite solar cells (pero-SCs) in ambient atmosphere. The FAPbI3 perovskite precursor ink uses volatile acetonitrile (ACN) as the main solvent with DMF and DMSO as coordination additives is beneficial to improve the ink stability, inhibit the coffee rings, and the complicated intermediate FAPbI3 phases, delivering high-quality pin-hole free and phase-pure FAPbI3 perovskite films with large-scale uniformity. Ultimately, small-area FAPbI3 pero-SCs (0.062 cm2 ) and large-area modules (15.64 cm2 ) achieved remarkable efficiencies of 24.32 % and 21.90 %, respectively, whereas the PCE of the devices can be maintained at 23.76 % when the printing speed increases to 18.0 m/min. Specifically, the unencapsulated device exhibits superior operational stability with T90 >1350 h. This work represents a step towards the scalable, cost-effective manufacturing of perovskite photovoltaics with both high performance and high throughput.

Precise synthesis and photovoltaic properties of giant molecule acceptors.

Series of giant molecule acceptors DY, TY and QY with two, three and four small molecule acceptor subunits are synthesized by a stepwise synthetic method and used for systematically investigating the influence of subunit numbers on the structure-property relationship from small molecule acceptor YDT to giant molecule acceptors and to polymerized small molecule acceptor PY-IT. Among these acceptors-based devices, the TY-based film shows proper donor/acceptor phase separation, higher charge transfer state yield and longer charge transfer state lifetime. Combining with the highest electron mobility, more efficient exciton dissociation and lower charge carrier recombination properties, the TY-based device exhibits the highest power conversion efficiency of 16.32%. These results indicate that the subunit number in these acceptors has significant influence on their photovoltaic properties. This stepwise synthetic method of giant molecule acceptors will be beneficial to diversify their structures and promote their applications in high-efficiency and stable organic solar cells.

Solid-Phase Electrosynthesis.

ConspectusThe significance of the new synthetic approach is that it can overcome the limitations of conventional methods and produce previously inaccessible polymer structures and materials. The solid-phase synthesis developed by Merrifield in 1964 is widely employed for the synthesis of biological molecules, such as peptides, nucleic acids, and oligosaccharides. Although the variety of iterative reactions available is theoretically implemented for most organic synthesis protocols, they are usually required to have high efficiency against sluggish reaction kinetics at the solid-liquid interface and process with protection and deprotection steps. Generally, unsatisfied reaction dynamics at the solid-liquid interface cannot statistically permit accurate and uniform polymer synthesis of sophisticated structures and functions within an acceptable time scale. To address this challenge, we propose the concept of solid-phase electrosynthesis, which simultaneously enables rapidly surface-initiated uniform electrosynthesis and unidirectional assembly of metallopolymers via kinetically accelerated and statistically allowed iterative growth. In particular, on a self-assembled monolayer (SAM) of the metal complex with electroactive unit A, the iterative monomer with two electroactive units A and B can be alternatively activated by oxidative and reductive potentials for A-A and B-B covalent couplings with the SAM, respectively. This enables topochemical one-by-one additions of the iterative monomers to end-on-oriented self-assembled molecules through alternative redox reactions. Each iterative step is purified by washing. Repeating the same iterative reaction enables further reaction of the unreactive sites on the SAMs and repairs the morphology defects, thereby ensuring the statistically allowed uniform synthesis and fabrication of polymer monolayers. The resulting monolayers exhibit subnanometer-uniform morphology over centimeter-sized areas with crystalline states and show thicknesses similar to theoretical molecular lengths. This demonstrates the unidirectional formation of polymer assemblies, providing a pathway for obtaining highly ordered formation of noncrystalline polymers. The length-controlled electrosynthesis of metallopolymers can be generalized for many types of organic ligands and metal species, enabling quantitative design of the composition and sequence-controlled metallopolymers with the precise relationships of structures and properties. Solid-phase electrosynthesis offers a unique approach to synthesize polymer structures and monolayers with enhanced functionality and superior physical properties, including physical density, modulus, and conductance. Through the utilization of precise and efficient iterative growth, this predictable electrosynthesis, coupled with optical and electrical monitoring, not only expands the scope of current synthetic chemistry but also paves a potential way for the automated generation of optoelectric molecular monolayers with large-area dimensional consistency and enhanced physical performance.

Nanoarchitectonics on Electrosynthesis and Assembly of Conjugated Metallopolymers.

In contrast to edge-on and face-on orientations, end-on uniaxial conjugated polymers have the theoretical possibility of providing a macroscopic crystalline film. However, their fabrication is insurmountable due to sluggishly thermodynamic equilibrium states. Herein, we report the programmatic pathway to fabricate nanoarchitectonics on end-on uniaxial conjugated metallopolymers by surface-initiated simultaneous electrosynthesis and assembly. Self-assembled monolayer (SAM) with bottom-up oriented electroactive molecules as a temple allows orientation, stacking, and reactive addition of monomers triggered by switching alternative redox reactions as well as crystallization of small molecules. Repeating the same reaction can repair the unreactive site on the SAM and dynamically and statistically ensure maximum iterative coverage with ideal linear coefficients between optical or electrical responses and iterative times. The resulting nanoarchitectonics on uniaxially assembled end-on polymers over centimeter-sized areas have a subnanometer-uniform morphology and exhibit ultrahigh modulus as well as an inorganic indium tin oxides and the highest conductance among conjugated molecular monolayers. Their memristive devices provide quantitative electrical and optical responses as a function of molecular length, bias, and iterative junctions. Precise processing of nanoarchitectonics as an electrically assisted assembly or printing technique can present sophisticated optoelectric functions and dimensional batch-to-batch consistency for micro-sized organic materials and electronics.

Advanced rehabilitation in ischaemic stroke research.

At present, due to the rapid progress of treatment technology in the acute phase of ischaemic stroke, the mortality of patients has been greatly reduced but the number of disabled survivors is increasing, and most of them are elderly patients. Physicians and rehabilitation therapists pay attention to develop all kinds of therapist techniques including physical therapy techniques, robot-assisted technology and artificial intelligence technology, and study the molecular, cellular or synergistic mechanisms of rehabilitation therapies to promote the effect of rehabilitation therapy. Here, we discussed different animal and in vitro models of ischaemic stroke for rehabilitation studies; the compound concept and technology of neurological rehabilitation; all kinds of biological mechanisms of physical therapy; the significance, assessment and efficacy of neurological rehabilitation; the application of brain-computer interface, rehabilitation robotic and non-invasive brain stimulation technology in stroke rehabilitation.

utPCR: A Strategy for the Highly Specific and Absolutely Quantitative Detection of Single Molecules within Only Minutes.

Bloodstream infection is a major health problem worldwide, with extremely high mortality. Detecting infection in the early stage is challenging due to the extremely low concentration of bacteria in the blood. Digital PCR provides unparalleled sensitivity and can achieve absolute quantification, but it is time-consuming. Moreover, the presence of unavoidable background signals in negative controls poses a significant challenge for single-molecule detection. Here, we propose a novel strategy called "Ultrafast flexible thin tube-based droplet digital PCR (utPCR)" that can shorten the digital PCR process from 2 h to only 5 min, with primer annealing/extension time reduced from minutes to only 5 s. Importantly, the ultrafast PCR eliminates nonspecific amplification and thus enables single-molecule detection. The utPCR enabled the sensitive detection and digital quantification of E. coli O157 in the high background of a 106-fold excess of E. coli K12 cells. Moreover, this method also displayed the potential to detect rare pathogens in blood samples, and the limit of detection (LOD) could be as low as 10 CFU per mL of blood without false positive results. Considered ultrafast (<5 min) and highly sensitive (single-molecule detection), the utPCR holds excellent prospects in the next generation of molecular diagnosis.

Green Solvent Processable, Asymmetric Dopant-Free Hole Transport Layer Material for Efficient and Stable n-i-p Perovskite Solar Cells and Modules.

The use of dopant-free hole transport layers (HTLs) is critical in stabilizing n-i-p perovskite solar cells (pero-SCs). However, these HTL materials are often processed with toxic solvents, which is not ideal for industrial production. Upon substituting them with green solvents, a trade-off emerges between maintaining the high crystallinity of the HTL materials and ensuring high solubility in the new solvents. In this paper, we designed a novel, linear, organic small molecule, BDT-C8-3O, by introducing an asymmetric polar oligo(ethylene glycol) side chain. This method not only overcomes the solubility limitations in green solvents but also enables stacking the conjugated main chains in two patterns, which further enhances crystallinity and hole mobility. As a result, the n-i-p pero-SCs based on chlorobenzene- or green (natural compound) solvent 3-methylcyclohexanone-processed BDT-C8-3O HTL that without any dopant delivered world-recorded power conversion efficiencies of 24.11 % (certified of 23.82 %) and 23.53 %, respectively. The devices also demonstrated remarkable operational and high-temperature stabilities, maintaining over 84 % and 79.5 % of their initial efficiency for 2000 h, respectively. Encouragingly, dopant-free BDT-C8-3O HTL exhibits significant advantages in large-area fabrication, achieving state-of-the-art PCEs exceeding 20 % for 5×5 cm2 modules (active area: 15.64 cm2 ), even when processed using green solvents.